Specifications

23-2 web Commands
23.2 timeout
Usethetimeoutcommandtoconfigurethetimeafterwhichthewebsessionwilltimeout.The
timeoutcommandisaccessiblefromthewebcontextofthe CLI.
Syntax
timeout <xx:xx> (hour:minutes or just minutes, range 1 minute to 7 days)
Parameters
Examples
Thefollowingexamplesetsthewebsession timeouttoonehourand30minutes.
EWC.enterasys.com:web# timeout 01:30
Thefollowingexamplesetsthewebsession timeoutto30minutes.
EWC.enterasys.com:web# timeout 00:30
23.3 showvns
UsetheshowvnscommandtodisplaytheVNSnamesintheWirelessAPSSIDlistonthe
controller’suserinterface(WirelessAPscreen).Usethenoformofthecommandtoremovethe
VNSnamesintheWirelessAPSSIDlist.Theshowvnscommandisaccessiblefromtheweb
contextof
theCLI.
Syntax
showvns
no showvns
Parameters
None
Examples
ThefollowingexampledisplaystheVNSnamesintheWirelessAPSSIDlistonthecontroller’s
userinterface(WirelessAPscreen).
EWC.enterasys.com:web# showvns
ThefollowingexampleremovestheVNSnamesintheWirelessAPSSIDlistonthecontroller’s
userinterface(WirelessAPscreen).
EWC.enterasys.com:web# no showvns
<xx:xx> Specifiestimeinhh:mmformat
Note: After you have run the timeout command, you must run the apply command to implement
the changes.
Note: After you have run the showvns command, you must run the apply command to implement
the changes.