Specifications

22-2 Location Commands (lbs)
22.2 server-ip
Usetheserver‐ipcommandtosettheAeroScoutIPaddress.Theserver‐ipcommandisaccessible
fromthelbscontextoftheCLI.
Syntax
server-ip A.B.C.D
Parameters
Usage
Thiscommandisvisibleonlyifyouhavesettheservicecommandtoenable.
ThedefaultIPaddressis0.0.0.0.
Examples
ThefollowingexamplesetstheIPaddressoftheAeroScoutserverto192.168.3.100.
EWC.enterasys.com:lbs# server-ip 192.168.3.100
22.3 show
UsetheshowcommandtodisplayinformationabouttheAeroScoutlocationbasedservice.The
showcommandisaccessiblefromthelbscontextoftheCLI.
Syntax
show
Parameters
None.
Examples
ThefollowingexampledisplaysinformationfortheAeroScoutlocationbased service.
EWC.enterasys.com:lbs# show
LBS server: 192.168.3.100
LBS status: enable
22.4 Related commands
ThefollowingcommandsinothercontextsrelatetotheAeroScoutlocationbasedservice:
• lbs‐status
• show
A.B.C.D SpecifiestheIPaddressoftheAeroScoutserver.