Specifications

Enterasys Wireless Controller Software CLI Reference Guide 21-33
Parameters
Examples
Thefollowingexampleenablesstrictsubnetadherenceonab@actopology.
EWC.enterasys.com:topology:bridged_ac1# strict-subnet enable
21.4.9 sync
Usethesynccommandtoenableordisableautomaticsynchronizationofthistopologyacross
pairedcontrollers.Thesynccommandisavailablefromthetopology:<named‐topology>context
oftheCLIforb@ac,b@ap,androutedtopologies.
Syntax
sync enable | disable
Parameters
Examples
Thefollowingexampleenablessynchronization.
EWC.enterasys.com:topology:r1# sync enable
enable Enablesstrictsubnetadherence.
disable Disablesstrictsubnetadherence.
enable Enablessynchronization.
disable Disablessynchronization.