Specifications

21-32 topology Commands
21.4.7 show
Usetheshowcommandtodisplayinformationaboutatopology.Theshowcommandisavailable
fromthetopology:<named‐topology>contextoftheCLIforadmin,b@ac,b@ap,physical, and
routedtopologies.
Syntax
show
Parameters
None
Examples
Thefollowingexamplesshowsconfigurationinformationforanadmintopology.
EWC.enterasys.com:topology:Admin# show
Name: Admin
Thefollowingexampleshowsconfigurationinformationforab@actopology.
EWC.enterasys.com:topology:Enterasys# show
Synchronize: disable
Name: Enterasys
Layer 3 presence: disable
Thefollowingexampleshowsconfigurationinformationforab@aptopology.
EWC.enterasys.com:topology:BridgedAP2# show
Synchronize: enable
Name: BridgedAP2
Thefollowingexampleshowsconfigurationinformationforaphysicaltopology.
EWC.enterasys.com:topology:esa0# show
Name: esa0
3rd party: disable
Thefollowingexampleshowsconfigurationinformationforaroutedtopology.
EWC.enterasys.com:topology:r1# show
Topology mode: routed
Synchronize: enable
Name: r1
21.4.8 strict-subnet
Usethestrict‐subnetcommandtoenableordisablestrictsubnetadherenceonab@actopology.
Thestrict‐subnetcommandisavailablefromthetopology:<named‐topology>contextoftheCLI
forb@actopologies.
Syntax
strict-subnet enable | disable