Specifications

Enterasys Wireless Controller Software CLI Reference Guide 21-31
Examples
ThefollowingexampleenablesLayer3onab@actopology.
EWC.enterasys.com:topology:bridged_ac1# l3presence enable
21.4.5 mode
Usethemodecommandtochangethemodeofanexistingb@ac,b@ap,orroutedtopology.The
modecommandisavailablefromthetopology:<named‐topology>contextoftheCLIforb@ac,
b@ap,androutedtopologies.
Syntax
mode b@ap | b@ac | routed
Parameters
Examples
Thefollowingexamplechangesthemodeofthetopologytob@ap.
EWC.enterasys.com:topology:bridged_ac1# mode b@ap
21.4.6 name
Usethenamecommandtochangethenameofanexistingb@ac,b@ap,orroutedtopology.The
namecommandisavailablefromthetopology:<named‐topology>contextoftheCLIforb@ac,
b@ap,androutedtopologies.
Syntax
name <Topology name>
Parameters
Examples
Thefollowingexamplechangesthenameofthetopologytobridged_ac2.
EWC.enterasys.com:topology:bridged_ac1# name bridged_ac2
disable DisablesLayer3.
Note: You can configure the mode of a topology only if the topology is not associated with a policy.
b@ap|b@ac|routed Specifiesthemodeofthetopology.
<Topologyname> Specifiesthenameofthetopology.