Specifications

21-28 topology Commands
21.4.3.10 mgmt
Usethemgmtcommandtoalloworprohibitmanagementtraffic.Themgmtcommandis
availablefromthetopology:<named‐topology>:l3contextoftheCLIforb@ac,physical,and
routedtopologies.
Syntax
mgmt enable | disable
Parameters
Examples
Thefollowingexampleenablesmanagementtraffic.
EWC.enterasys.com:topology:r1:l3:# mgmt enable
21.4.3.11 mtu
UsethemtucommandtosettheinterfaceMTU(MaximumTransmi ssionUnit),whichspecifies
themaximumallowablesize,inbytes,ofadatapacketontheEthernetport.Themtucommandis
availablefromthetopology:<named‐topology>:l3contextoftheCLIforadmin,b@ac,physical,
androutedtopologies.
Syntax
mtu <576-1500>
Parameters
Examples
ThefollowingexamplesetsthesizeoftheMTUto1500bytes.
EWC.enterasys.com:topology:r1:l3:# mtu 1500
21.4.3.12 nexthop
UsethenexthopcommandtosettheIPaddressofthenexthoprouterthroughwhichtrafficwill
bedirected.Thenexthopcommandisavaila blefromthetopology:<named‐topology>:l3context
oftheCLIforroutedtopologies.
Syntax
nexthop A.B.C.D | none
Parameters
enable Enablesmanagementtraffic.
disable Disablemanagementtraffi c.
<576‐1500> Specifiesthesize,inbytes,oftheMTU.
A.B.C.D SpecifiestheIPaddressofthenexthoprouter.
none ClearstheIPaddressofthenexthoprouter.