Specifications

Enterasys Wireless Controller Software CLI Reference Guide 21-17
fromthetopology:<named‐topology>:l3:dhcpcontextoftheCLIforb@acandroutedtopologies.
Thiscommandisvisibleonlywhenmodeissettolocal.See“mode”onpage 21‐18.
Syntax
foreign-range A.B.C.D A.B.C.D
Parameters
Examples
Thefollowingexamplespecifies theIPaddressrange.
EWC.enterasys.com:topology:routed2:l3:dhcp# mode local
EWC.enterasys.com:topology:routed2:l3:dhcp# foreign-range 10.44.6.2 10.44.6.254
21.4.3.4.9 gateway
UsethegatewaycommandtospecifythegatewayIPaddress.Thegatewaycommandisavailable
fromthetopology:<named‐topology>:l3:dhcpcontextoftheCLIforb@acandphysical
topologies.Forinformationaboutthegatewaycommandfortheadmintopology,see“gateway”
onpage 21‐26.
Syntax
gateway A.B.C.D | none
Parameters
Examples
ThefollowingexampleclearsthegatewayIPaddress.
EWC.enterasys.com:topology:esa1:l3:dhcp# gateway none
21.4.3.4.10 lease-default
Usethelease‐defaultcommandtosetthedefaulttimelimit,inseconds,thatanIPaddresswould
beassignedbytheDHCPservertoawirelessdevice.Thelease‐defaultcommandisavailable
fromthetopology:<named‐topology>:l3:dhcpcontextoftheCLIforb@ac,physical,androuted
topologies.Thiscommandis
visibleonlywhenmodeissettolocal.See“mode”onpage 21‐18.
Syntax
lease-default <int>
Parameters
A.B.C.D SpecifiesthefirstIPaddressintheIPaddressrange
A.B.C.D SpecifiesthelastIPaddressintheIPaddressrange
A.B.C.D SpecifiesthegatewayIPaddress.
none ClearsthegatewayIPaddress.
<int> Specifiesthetimelimitinseconds