Specifications

21-16 topology Commands
contextoftheCLIforb@ac,physical,androutedtopologies.Thiscommandisvisibleonlywhen
modeissettolocal.See“mode”onpage 21‐18.
Syntax
exclude A.B.C.D [A.B.C.D] [delete | (comment <comment string>)]
Parameters
Examples
Thefollowingexampleexcludestheaddressrange10.0.1.10–10.0.1.20.
EWC.enterasys.com:topology:test:l3:dhcp# mode local
EWC.enterasys.com:topology:test:l3:dhcp# exclude 10.0.1.10 10.0.1.20
21.4.3.4.7 foreign-gateway
Usetheforeign‐gatewaycommandtoconfiguretheremoteEnterasysWirelessControllerina
pairedcontrollerconfiguration.Theforeign‐gatewaycommandisavailablefromthe
topology:<named‐topology>:l3:dhcpcontextoftheCLIforroutedtopologies.Thiscommandis
visibleonlywhenmodeissettolocal.See“mode”onpage 21‐
18.
Syntax
foreign-gateway A.B.C.D | none
Parameters
Examples
ThefollowingexampleclearstheIPaddressoftheremoteEnterasysWirelessController.
EWC.enterasys.com:topology:routed1:l3:dhcp# mode local
EWC.enterasys.com:topology:routed1:l3:dhcp# foreign-gateway none
21.4.3.4.8 foreign-range
Usetheforeign‐rangecommandtoconfiguretheDHCPpoolofaddressesforaremoteEnterasys
WirelessControllerinapairedcontrollerconfiguration.Theforeign‐rangecommandisavailable
A.B.C.D[A.B.C.D] SpecifiestheIPaddressorrangeofIPaddresses.
delete ClearstheIPaddresses.
comment<commentstring> AcommentabouttheexcludedIPaddress
orrangeofIP
addresses.
A.B.C.D SpecifiestheIPaddressoftheremoteEnterasysWireless
Controller.
none ClearstheIPaddressoftheremoteEnterasysWireless
Controller.