Specifications

21-10 topology Commands
• exceptions—Seeexceptionsforcommandsinthetopology:<named‐topology>:l3:exceptions
context.
• foreign‐ip
• gateway
• gen‐certreq
• ip
• mgmt
• mtu
• nexthop
• ospf‐advert
• ospf‐cost
• show
21.4.3.1 ap-register
Usetheap‐registercommandtoenableordisableAPregistrationthroughthe namedtopology.
Theap‐registercommandisavailablefromthetopology:<named‐topology>:l3contextoftheCLI
forb@acandphysicaltopologies.
Syntax
ap-register enable | disable
Parameters
Examples
ThefollowingexampleenablesAPregistration.
EWC.enterasys.com:topology:esa0:l3# ap-register enable
21.4.3.2 cert
Usethecertcommandtodefinecertificatesettingsfor thenamedtopologyinthecurrentcontext.
Usingthecertcommandwiththedefaultoptionremovesthecertificatefromthenamedtopology
andassignsthefactorydefaultcertificatetoit.
Syntax
cert (( pkcs12 <scp|ftp> <server> <user> <password> <dir> <filename>
<certpassword> [chainfile]) | (pem-der <scp|ftp> <server> <user> <password> <dir>
<filename> <keyfile> <certpassword> [chainfile])| (csr-cert <scp|ftp> <server>
<user> <password> <dir> <filename> [chainfile])) | permanent | permanent-chain |
default
enable EnablesAPregistrationthroughthisinterface.
disable DisablesAPregistrationthroughthisinterface.