Specifications

Enterasys Wireless Controller Software CLI Reference Guide 3-13
CLI Export start: Mon Aug 16 11:06:59 2010
CLI Export end: Mon Aug 16 11:07:03 2010
Creating lab-91-f.16082010.110654...
Backup/Export complete.
EWC.enterasys.com#
3.7 flash
UsetheflashcommandtomountordismounttheflashcardontheEntera sysWirelessController.
Syntax
flash <mount|unmount>
Parameters
Examples
ThefollowingexamplemountstheflashcardontheEnterasysWirelessController.
EWC.enterasys.com# flash mount
ThefollowingexampledismountstheflashcardfromtheEnterasysWirelessController.
EWC.enterasys.com# flash unmount
3.8 no flash
Usethenoflashcommandtodeletefilesonaflashcard.Thenoflashcommandisundertheroot
context.
Syntax
no flash <file name>
Examples
Thefollowingexampledeletesthefilesfromtheflashcard.
EWC.enterasys.com# no flash lab-91-f.16082010.110525
Note: During the export process, the .zip file containing the controller's data is zipped. The exported
file displays .zip extension.
Note: If you want to upload the controller’s data to the FTP server, you must use the copy backup
command. For more information, see “3.4, copy” on page 3-7.
<mount> Specifiestomounttheflashcard
<unmount> Specifiestodismounttheflashcard
Note: This command is not accessible on platforms that do no support flash devices.