Specifications

Enterasys Wireless Controller Software CLI Reference Guide 20-17
Parameters
Usage
EnablingAPcustomfiltersprovidesfortheabilitytoaccess thepolicy:<named‐policy>:apfilters
contextusingtheapfilterscommand.Theapfilterscommandallowsfortheconfigurationof
additionalfiltersfortheAPs.
FilteringontheAPmustbeenabledusingtheulfilterapenablecommandfortheapcustom
commandtobevisiblein
theCLI.
Examples
ThefollowingexampleenablesAPcustomfiltersforthepolicy:p1:apfilterscontext:
EWC.enterasys.com:policy:p1# ulfilterap enable
EWC.enterasys.com:policy:p1# apcustom enable
EWC.enterasys.com:policy:p1#
20.5.11 apfilters
Usetheapfilterscommandtoenterthepolicy:<named‐policy>:apfilterscontextforthe
configuringofAPcustomfilters.APcustomfiltersareappliedattheAP.Theapfilterscommand
isaccessiblefromthepolicy:<named‐policy>context.
Thefollowingcommandsareavailableinthepolicy:<named‐policy>:apfilterscontext.
• create
• config
• delete
• move
Syntax
apfilter
Parameters
None.
Usage
TheapplycustomfilterstoAPfeaturemustbeenabledusingthetheapcustomenablecommand
fortheapfilterscommandtobevisibleintheCLI.
enable|disable ProvidesfortheenablingordisablingofAPcustomfiltersforthis
policy:<named‐policy>context.
Notes: You must execute the ulfilterap enable command and the apcustom enable command
before the apfilters command is visible.
The apfilter command has been replaced by apfilters. apfilter is deprecated.