Specifications

20-16 policy Commands
Assigned topology: guestPortal
Ingress rate profile: no change
Egress rate profile: no change
Do not change filter settings when this Policy is applied: disable
Enable AP filtering: disable
Name: p1
Synchronize: disable
EWC.enterasys.com:policy:p1#
20.5.9 ulfilterap
UsetheulfilterapcommandtoenablefilteringontheAP.Theulfilterapcommandisaccessible
fromthepolicy:<named‐policy>context.
Syntax
ulfilterap {enable | disable}
Parameters
Usage
WhenfilteringisenabledontheAP,wirelessAPsobtainclientfilterinformationfromthe
EnterasysWirelessController.FilterrulesdefinedonthecontrollerareappliedbywirelessAPs.In
addition,directinter‐WirelessAPcommunicationallowsWirelessAPstoexchangeclientfilter
informationasclientsroamfromoneWirelessAP
toanother.
Thefiltersettingfeaturemustbedisabledusingthefilterdisablecommandfortheapfilters
commandtobevisibleintheCLI.
See“apcustom”onpage 20‐16toapplycustomfiltersfortheAP.
Examples
ThefollowingexampleenablesfilteringontheAPforthispolicy:p1context:
EWC.enterasys.com:policy:p1# ulfilterap enable
EWC.enterasys.com:policy:p1#
20.5.10 apcustom
UsetheapcustomcommandtoenableAPcustomfilters.Theapcustomcommandisaccessible
fromthepolicy:<named‐policy>context.
Syntax
apcustom {enable | disable}
enable|disable ProvidesfortheenablingordisablingoffilteringontheAPforthis
policy:<named‐policy>context.