Specifications

Enterasys Wireless Controller Software CLI Reference Guide 20-15
Usage
Referto“rateprofile”onpage 18‐32forRateProfileConfigurationInformation.
Examples
Thefollowingexampleconfiguresthep1<named‐policy>withtheUnlimitedegressrateprofile:
EWC.enterasys.com:policy:p1# rateprf-out Unlimited
EWC.enterasys.com:policy:p1# apply
EWC.enterasys.com:policy:p1# show
Assigned topology: no change
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Do not change filter settings when this Policy is applied: disable
Enable AP filtering: disable
Name: p1
Synchronize: disable
EWC.enterasys.com:policy:p1#
20.5.8 topology-name
Usethetopology‐namecommandtoassociateanalreadyexistingtopologywithapolicy.The
topology‐namecommandisaccessible fromthepolicy:<named‐policy>context.
Syntax
topology-name <topology> | no-change
Parameters
Usage
RefertoChapter 21,topologyCommandsforinformationonconfiguringtopologies.
Examples
Thefollowingexampleconfiguresthep1<named‐policy>withtheguestPortaltopology:
EWC.enterasys.com:policy:p1# topology-name guestPortal
EWC.enterasys.com:policy:p1# apply
EWC.enterasys.com:policy:p1# show
no‐change Specifiesthatnorateprofilechangeisassociatedwiththispolicy.
Whenapplyingthispolicytoauseratruntime,theuserretainsthe
egressrateprofilecurrentlyenforced.
<topology> Specifiesthenameofthetopologytoconfigureforthis
policy:<named‐policy>context.
no‐change Specifiesthatnotopologychangeisassociatedwiththispolicy.When
applyingthispolicytoauseratruntime,theuserretainsthetopology
currentlyenforced.