Specifications

Enterasys Wireless Controller Software CLI Reference Guide 20-7
EWC.enterasys.com:policy:p1# name policy1
EWC.enterasys.com:policy:p1# apply
EWC.enterasys.com:policy:p1# show
Assigned topology: no change
Ingress rate profile: no change
Egress rate profile: no change
Do not change filter settings when this Policy is applied: disable
Enable AP filtering: disable
Name: policy1
Synchronize: disable
EWC.enterasys.com:policy:p1# exit
EWC.enterasys.com:policy# policy1
EWC.enterasys.com:policy:policy1#
20.5.4 sync
Usethesynccommandtoenableordisableautomaticsynchronizationofthis<named‐policy>
acrosspairedcontrollers.RefertoSection6.2.7,“UsingtheSyncSummary,”intheEnterasys
WirelessControllerUserGuideformoreinformationaboutsynchronizationofpolicies.
Thesynccommandisaccessiblefromwithinthepolicy:<named‐policy>context.
Syntax
sync {enable | disable}
Parameters
Examples
Thefollowingexampleenablesthesynchronization ofthep1policyacrosscontrollers:
EWC.enterasys.com:policy:p1# sync enable
EWC.enterasys.com:policy:p1# apply
EWC.enterasys.com:policy:p1# show
Assigned topology: no change
Ingress rate profile: no change
Egress rate profile: no change
Do not change filter settings when this Policy is applied: disable
Enable AP filtering: disable
Name: p1
Synchronize: enable
EWC.enterasys.com:policy:p1#
enable|disable Enablesordisablesautomaticsynchronizationofthis<named‐policy>
acrosspairedcontrollers.