Specifications

Enterasys Wireless Controller Software CLI Reference Guide 20-5
• apcustom
• apfilters—Seeapfiltersforcommandsinthepolicy:<named‐policy>:apfilterscontext.
20.5.1 show
Usetheshowcommandtodisplaythe<named‐policy>configurationinformationforthecurrent
policy:<named‐policy>context.Theshowcommandisaccessiblefromwithinthethe
policy:<named‐policy>context.
Syntax
show
Parameters
None.
Examples
Thefollowingexampledisplaysthep1policyconfigurationfromwithinthep1policy:<named‐
policy>context:
EWC.enterasys.com:policy# p1
EWC.enterasys.com:policy:p1# show
Assigned topology: no change
Ingress rate profile: snmpDefault.0
Egress rate profile: snmpDefault.64
Do not change filter settings when this Policy is applied: disable
Enable AP filtering: disable
Name: p1
Synchronize: disable
EWC.enterasys.com:policy:p1#
20.5.2 filter-status
Usethefilter‐statuscommandtoconfigurethefilterfeaturesetting.Thefilter‐statuscommandis
accessiblefromwithinthethepolicy:<named‐policy>context.
Syntax
filter-status {enable | no-change}
Parameters
Usage
Ifthefilter‐statuscommandissettoenabled,theacfiltersandulfilterapcommandsareavailable
sothatyoucanmodifythecurrentACandAPfilterconfiguration.
enable EnableACandAPfilterrulemodificationforthepolicybeing
configured.
no‐change Keepthepreviousfilterinuse.