Specifications

Enterasys Wireless Controller Software CLI Reference Guide 20-3
20.2 delete
Usethedeletecommandtodeleteapolicy,specifyingthenameofthepolicytobedeleted.The
deletecommandisaccessiblefromthepolicycontextoftheCLI.
Syntax
delete <policy-name>
Parameters
Thefollowingexampledeletesthepolicynamedp6.
EWC.enterasys.com:policy# delete p6
20.3 enable-advance-filtering
Usethiscommandtoenableadvancedfilteringdefinitions.Theenable‐advance‐filtering
commandisaccessiblefromthepolicycontextoftheCLI.
Syntax
enable-advance-filtering
Parameters
None.
Usage
Bydefault,whenv7.41isinstalled,thecontrollerwillbeincompatibilitymode.Afterall
controllersandAPsinadeploymenthavebeenupgraded tov7.41,advancedfilteringdefinitions
canbeenabledwiththiscommand.Afteradvancedfilteringhasbeenenabled,thecontrollercan
bereturnedtocompatibilitymodeonlyby
importingabackupconfiguration.
Examples
Thisexampleenablesadvancedfilteringdefinitions.
EWC.enterasys.com:policy# enable-advance-filtering
20.4 show
Usetheshowcommandtodisplaypolicyconfigurationinformation.Theshowcommandis
accessiblefromwithinthethepolicycontext.
Syntax
show {policy | <policy-name>}
Parameters
<policy‐name> Specifiesthenameofthepolicytodelete
policy Specifiesthatinforma tionforallconfiguredpoliciesshouldbe
displayed
<policy‐name> Specifiesthatinformationforthenamedpolicyshouldbedisplayed.