Specifications

20-2 policy Commands
20.1 create
Usethecreatecommandtocreateanewpolicy,specifyinganameforthenewpolicy.Thecreate
commandisaccessiblefromthepolicycontext.
Syntax
create <policy-name>
Parameters
Usage
Thedefaultvaluesforanewlycreatedpolicyare:
•DefaultFilter:disabled
•ACFilter:Controllerfilteringisactive,withadefaultfilterofdenyinbothdirections
•Ingressrateprofile:no‐change
•Egressrateprofile:no‐change
• Topology:no‐change
•FilteringontheAP:disabled
• Synchronization:disabled
Examples
Thefollowingexamplecreatesandthendisplaysthedetailsofapolicynamedp6:
EWC.enterasys.com:policy# create p6
EWC.enterasys.com:policy# show p6
Assigned topology: no change
Ingress rate profile: no change
Egress rate profile: no change
Filter settings: enable
Enable AP filtering: disable
Name: p6
EWC.enterasys.com:policy# show p6 acfilter
Enable AP filtering: disable
filter 1 (default) proto none 0.0.0.0 all_ports in dst out none allow
filter 2 (default) proto none 0.0.0.0 all_ports in none out src allow
<policy‐name> Specifiesthenameofthepolicy.Ap olicynamecanbemadeup
ofallalpha‐numericcharacters,aswellasspecialcharacters:‐
!#$: