Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-59
Parameters
Examples
Thefollowingexampleenablesthis WLANservice
EWC.enterasys.com:wlans:test# status enable
EWC.enterasys.com:wlans:test# apply
EWC.enterasys.com:wlans:test# show status
Enable status: enable
19.6.19 sync
UsethesynccommandtoenableordisableautomaticsynchronizationofthisWLANservice
acrosspairedEnterasysWirelessControllers.Thesynccommandisaccessiblefromthe
wlan:<WLAN‐service‐name>contextoftheCLI.
Syntax
sync enable | disable
Parameters
Examples
ThefollowingexampleenablessynchronizationforthisWLANservice
EWC.enterasys.com:wlans:test# sync enable
EWC.enterasys.com:wlans:test# apply
EWC.enterasys.com:wlans:test# show sync
Synchronize: enable
19.6.20 timeout-post
Usethetimeout‐postcommandtosetthepost‐authenticationtimeoutvalue(inminutes)forthis
WLANservice.Thetimeout‐postcommandisaccessiblefromthewlan:<WLAN‐service‐name>
contextoftheCLI.
Syntax
timeout-post <0-999999>
enable|disable EnablesordisablesthisWLANservice
Note: After you run the status command, you must run the apply command to implement the
changes.
enable|disable EnablesordisablesautomaticsynchronizationofthisWLANservice
acrosspairedEnterasysWirelessControllers
Note: After you run the sync command, you must run the apply command to implement the
changes.