Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-57
Process client IE requests: disable
Enable 11h support: disable
Apply power reduction to 11h clients: disable
Suppress SSID: disable
Energy save mode: disable
19.6.15.6 ssid-suppress
Usethessid‐suppresscommandtoalloworpreventtheSSIDfrombeingbroadcastbythe
WirelessAP.Thessid‐suppresscommandisaccessiblefromthewlan:<WLAN‐service‐name>:rf
contextoftheCLI.
Syntax
ssid-suppress enable | disable
Parameters
Examples
ThefollowingexamplepreventsSSIDbroadcasts
EWC.enterasys.com:wlans:CNL6-AAA# ssid-suppress enable
EWC.enterasys.com:wlans:CNL6-AAA# apply
19.6.16 show
Usethewlan:<WLAN‐service‐name>:showcommandtodisplaythecurrentsettingsofthe
specifiedindividualWLANservice.Theshowcommandisaccessiblefromthewlan:<WLAN‐
service‐name>contextoftheCLI.
Examples
ThefollowingexampledisplaysthecurrentWLANservicesettingsfortheWLANservicenamed
“test.”
EWC.enterasys.com:wlans:test# show
Service type: std
Name: test
Synchronize: disable
Enable status: enable
Wireless AP Services:
Wireless AP: 04099202012xxxxx
Wireless AP: 04099202012xxxxx
Wireless AP: 05000092030xxxxx
SSID: _ssidtest
pre-authentication timeout(minutes): 5
enable|disable EnablesordisablesthesuppressionofbroadcastoftheSSID
Note: After you run the ssid-suppress command, you must run the apply command to implement
the changes.