Specifications

19-56 wlans Commands
19.6.15.3 energy-save-mode
Usetheenergy‐save‐modecommandtoenableordisabletheAPenergysavingmode.The
energy‐save‐modecommandisaccessiblefromthewlan:<WLAN‐service‐name>:rfcontextofthe
CLI.
Syntax
energy-save-mode enable | disable
Parameters
Examples
ThefollowingexampleenablesAPenergysavingmode:
EWC.enterasys.com:wlans:CNL-7-CP:rf# energy-save-mode enable
19.6.15.4 process-client-ie
Usetheprocess‐client‐iecommandtoenableordisabletheprocessingofInformationElement10
(IE10).Theprocess‐client‐iecommandisaccessiblefromthewlan:<WLAN‐service‐name>:rf
contextoftheCLI.
Syntax
process-client-ie enable | disable
Parameters
Examples
ThefollowingexampleenablesIE10processing:
EWC.enterasys.com:wlans:CNL-7-CP:rf# process-client-ie enable
EWC.enterasys.com:wlans:CNL-7-CP:rf# apply
19.6.15.5 show
UsetheshowcommandtodisplaythecurrentRFsettingsofthespecifiedindividualWLAN
service.Theshowcommandisaccessiblefromthewlan:<WLAN‐service‐name>:rfcontextofthe
CLI.
Examples
ThefollowingexampledisplaysthecurrentRFsettingsfortheWLANservicenamed“test.”
EWC.enterasys.com:wlans:test:rf# show
enable|disable EnablesordisablestheAPenergysavingmodeontheWLANservice.
enable|disable EnablesordisablestheprocessingofInformationElement10(IE10)
ontheEnterasysWirelessController
Note: After you run the process-client-ie command, you must run the apply command to
implement the changes.