Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-55
Parameters
Examples
ThefollowingexampleenablesthepowerreductionfeatureontheWLANservice:
EWC.enterasys.com:wlans:test:rf# 11h-power-reduction enable
EWC.enterasys.com:wlans:test:rf# apply
EWC.enterasys.com:wlans:test:rf# show 11h-power-reduction
Apply power reduction to 11h clients: enable
19.6.15.2 11h-support
802.11hsupportontheEnterasysWirelessControllerwillallowclientstooperatewiththe
maximumavailabletransmissionpowerin5Ghzbands.The11h‐supportcommandisaccessible
fromthewlan:<WLAN‐service‐name>:rfcontextoftheCLI.
Usethe11h‐supportcommandtoenable802.11hsupportontheWLANservice.
Syntax
11h-support enable | disable
Parameters
Examples
Thefollowingexampleenables802.11hsupportontheWLANservice:
EWC.enterasys.com:wlans:test:rf# 11h-support enable
EWC.enterasys.com:wlans:test:rf# apply
EWC.enterasys.com:wlans:test:rf# show 11h-support
Enable 11h support: enable
enable|disable Enablesordisablesautomaticpowerreductionoftransmissionsusing
the802.11hstandard
Note: After you run the 11h-power-reduction command, you must run the apply command to
implement the changes.
enable|disable Enablesordisables802.11hsupportontheEnterasysWireless
Controller
Note: After you run the 11h-support command, you must run the apply command to implement the
changes.