Specifications

19-54 wlans Commands
19.6.14 remoteable
UsetheremoteablecommandtoenableordisabletheSSIDadvertisementtothemobilitydomain.
Theremoteablecommandisaccessiblefromthewlan:<WLAN‐service‐name>contextoftheCLI.
Syntax
remoteable enable | disable
Parameters
Examples
ThefollowingexampleenablestheSSIDadvertisementfortheCNL‐7‐CPWLANS:
EWC.enterasys.com:wlans:CNL-7-CP# remoteable enable
EWC.enterasys.com:wlans:CNL-7-CP# apply
EWC.enterasys.com:wlans:CNL-7-CP# show remoteable
Remote Service: enable
19.6.15 rf
Therfcommandmovesyoutothewlan:<WLAN‐service‐name>:rfcontext,whichcontains
commandstoconfigureRFoptionsfortheWLANservice.
Thefollowingcommandsareavailableinthewlan:<WLAN‐service‐name>:rfcontext.
• 11h‐power‐reduction
• 11h‐support
• energy‐save‐mode
• process‐client‐ie
• show
• ssid‐suppress
19.6.15.1 11h-power-reduction
Usethe11h‐power‐reductioncommandtoenableordisableautomaticpowerreductionof
transmissionsusingthe 802.11hstandard.The11h‐power‐reductioncommandisaccessiblefrom
thewlan:<WLAN‐service ‐name>:rfcontextoftheCLI.
Syntax
11h-power-reduction enable | disable
enable|disable EnablesordisablestheSSIDadvertisementtothemobility
domain.
Note: After you run the remoteable command, you must run the apply command to implement the
changes.