Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-51
19.6.13.10 uapsd
UsetheuapsdcommandtoenableUnscheduledAutomaticPowerSaveDelivery(U‐APSD)onthe
VNS.Usethenoformofthecommandtodisableit.Theuapsdcommandisaccessiblefromthe
wlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
uapsd enable | disable
Parameters
Usage
Thiscommandisonlyavailablewheneitherthe802.11eorwmmcommandshavebeenenabled.
Formoreinformationsee“dot11e”onpage 19‐46and“wmm”onpage 19‐52.
Examples
ThefollowingexampleenablesU‐APSDontheCNL‐7‐CPWLANS:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# uapsd enable
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show uspsd
Enable U-APSD: enable
19.6.13.11 uplink
UsetheuplinkcommandtomanagetheuplinkpoliceractionforthisWLANS.Theuplink
commandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
uplink delts | do-nothing
Parameters
Usage
ThiscommandisonlyactiveiftheVideoandVoiceAdmissionControlissettoenable.See“video‐
admission‐control”onpage 19‐52and“voice‐admission‐control”onpage 19‐53
enable|disable EnablesordisablesU‐APSD.Defaultvalue:disabled.
Note: After you run the uapsd command, you must run the apply command to implement the
changes.
delts Specifie sthatTSPECviolationswillendwhentheyarediscovered.
ThisactiondeletestheTSPEC.
do‐nothing SpecifiesthatTSPECviolationsareallowedtocontinuewhentheyare
discovered.Datatransmissionswillcontinueandnoactionistaken
againsttheviolatingtransmissions.