Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-49
Examples
ThefollowingexampleoverridespriorityforallpacketsonWLANSCNL‐7‐CP:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# priority-override enable
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show priority-override
Priority override: enable
19.6.13.7 priority-override-dscp
Usethepriority‐override‐dscpcommandtooverrideexistingDSCPcodepointassignments for
priorityprocessinganduseasingleDSCPcodepointfortheWLANS. Thepriority‐override‐dscp
commandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
priority-override-dscp <0-64>
Parameters
Usage
Thiscommandisonlyactiveifthepriority‐overridecommandhasbeenenabled.Formore
information,see“priority‐override”onpage 19‐48.
Examples
ThefollowingexampleoverridesallexistingDSCPcodep ointassignm entsandusesDSCP
codepoint2fortheCNL‐7‐CPWLANS:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# priority-override-dscp 2
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show priority-override-dscp
DSCP marking: 2
19.6.13.8 priority-override-up
Usethepriority‐override‐upcommandtooverrideexistingServiceClasssettingsforpriority
processingandconfigureasingleServiceClassvaluefortheWLANS.Thepriority‐override‐up
commandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
priority-override-up <0-7>
Note: After you run the priority-override command, you must run the apply command to
implement the changes.
<0‐64> SpecifiesaDSCPcodepointvalue.Defaultvalue:0.
Note: After you run the priority-override-dscp command, you must run the apply command to
implement the changes.