Specifications

19-48 wlans Commands
19.6.13.5 priority-map
Usethepriority‐mapcommandtoconfigureDifferentiatedServiceCodePoint(DSCP)
classificationbymappingServiceClassuserprioritylevelstoDSCPcodepoints.Thepriority‐map
commandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
priority-map dscp <0-64> user-priority <0-7>
Parameters
Examples
ThefollowingexampleassignsaServiceclassof7toDSCPcodepoint24:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# priority-map dscp 24 user-priority 7
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show priority-map
DSCP CLASSIFICATION
dscp-marking service-class
0 02
1 00
.
23 00
24 07
25 00
19.6.13.6 priority-override
Usethepriority‐overridecommandtooverridethepriorityforallpacketsintheWLANS.The
priority‐overridecommandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policy
contextoftheCLI.
Syntax
priority-override enable | disable
Parameters
Note: After you run the legacy command, you must run the apply command to implement the
changes.
dscp<0‐64> SpecifiesaDSCPcodepointvalue
user‐priority<0‐7> SpecifiestheServiceClassvaluetobeassignedtoaDSCPcodepoint
Note: After you run the priority-map command, you must run the apply command to implement
the changes.
enable|disable Enablesordisablespriorityoverrideforallpacketsinthe
WLANS