Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-47
19.6.13.3 flex-client-access
Usetheflex‐client‐accesscommandtoenableordisableflexibleclientaccesstothewireless
medium.Theflex‐client‐accesscommandisaccessiblefromthewlan:<WLA N‐service ‐
name>:qos‐policycontextoftheCLI.
Syntax
flex-client-access enable | disable
Parameters
Examples
Thefollowingexampleenablesflexibleclientaccesstothewirelessmedium:
EWC.enterasys.com:wlans:test:qos-policy# flex-client-access enable
EWC.enterasys.com:wlans:test:qos-policy# apply
EWC.enterasys.com:wlans:test:qos-policy# show flex-client-access
Flex client access: enable
19.6.13.4 legacy
Usethelegacycommandtoenableordisablethelegacysolution,whichgivesallpacketsonthe
VNShighpriority.Thelegacycommandisaccessiblefromthewlan:<WLAN‐service‐
name>:qos‐policycontextoftheCLI.
Syntax
legacy enable | disable
Parameters
Examples
ThefollowingexampleenablesthelegacysolutionfortheVNS
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# legacy enable
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show legacy
Legacy: enable
Note: After you run the downlink command, you must run the apply command to implement the
changes.
enable|disable Enablesordisablesflexibleclientaccesstothe wireless
medium
Note: After you run the flex-client-access command, you must run the apply command to
implement the changes.
enable|disable Enablesordisablesflexibleclientaccesstothe wireless
medium