Specifications

19-46 wlans Commands
19.6.13.1 dot11e
Usethedot11ecommandtoenableordisable802.11eradioQoSsupport.Thedot11ecommandis
accessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
dot11e enable | disable
Parameters
Examples
Thefollowingexampleenables802.11esupportontheEnterasysWirelessController:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# dot11e enable
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# show dot11e
802.11e: enable
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy#
19.6.13.2 downlink
UsethedownlinkcommandtomanagedownlinkpoliceractionforthisWLANS.Thedownlink
commandisaccessiblefromthewlan:<WLAN‐service‐name>:qos‐policycontextoftheCLI.
Syntax
downlink downgrade | drop | do-nothing
Parameters
Examples
ThefollowingexampledefinestheQoSdownlinkpolicytodropthetransmission’sdatapackets
whenaTSPECviolationisdiscovered:
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# downlink drop
EWC.enterasys.com:wlans:CNL-7-CP:qos-policy# apply
enable|disable Specifytoenableordisable802.11eradioQoSsupport
Note: After you run the dot11e command, you must run the apply command to implement the
changes.
downgrade Specifiesthatthetransmission’sdatapacketsareforcedtobe
downgradedtothenextprioritywhenaTSPECviolationis
discovered
drop Specifiesthatthetransmission’sdatapacketsareforcedtobedropped
whenaTSPECviolationisdiscovered
do‐nothing SpecifiesthattheTSPECviolationsareallowedtocontinuewhenthey
arediscovered.Data
transmissionswillcontinueandnoactionistaken
againsttheviolatingtransmissions