Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-39
19.6.9 interwlan-roaming
Usethiscommandtoenableordisableinter‐WLANroamingonthisWLANservice.The
interwlan‐roamingcommandisaccessiblefromthewlan:<WLAN‐service‐name>contextofthe
CLI.
Syntax
interwlan-roaming enable|disable
Parameters
Examples
Thisexampledisablesinter‐WLANroamingontheWLANservicenamedtest.
EWC.enterasys.com:wlans:test# interwlan-roaming disable
19.6.10 name
UsethenamecommandtomodifythenameofthisWLANservice.Thenamecommandis
accessiblefromthewlan:<WLAN‐service‐name>contextoftheCLIwhentheWLANservicetype
isSTD.
Syntax
name <WLAN-service-name>
Parameters
Examples
ThefollowingexamplechangesthenameofthetestWLANserveto“not‐test”:
EWC.enterasys.com:wlans:test# name not-test
EWC.enterasys.com:wlans:test# apply
EWC.enterasys.com:wlans:test# show name
Name: not-test
Note: After you run the direct-client-traffic command, you must run the apply command to
implement the changes.
enable Enablestheinter‐WLANroamingfeatureforthisWLANservice.Thisis
thedefaultsetting.
disable Disablestheinter‐WLANroamingfeature.
<WLAN‐service‐name> SpecifiesthenametouseforthisWLANservice
Note: After you have run the name command, you must run the apply command to implement the
name change.