Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-37
19.6.5.25 show
Usetheshowcommandtodisplaythecurrentauthenticationsettingsofthespecifiedindividual
WLANservice.Theshowcommandisaccessiblefromthewlan:<WLAN‐service‐name>:auth
contextoftheCLI.
Examples
ThefollowingexampledisplaysthecurrentauthenticationsettingsfortheWLANservicenamed
Lab126‐12‐AAA.:
EWC.enterasys.com:wlans:Lab126-12-AAA:auth# show
No radius server has been selected
Priority Name Role NAS IP NAS ID Auth Type
1 IAS auth Use VNS IP address Use VNS name EAP
1 IAS acct Use VNS IP address Use VNS name
MAC-based authorization: disable
Authentication mode: 8021x
AP as VSA attribute: enable
SSID as VSA attribute: enable
VNS as VSA attribute: enable
Policy as VSA attribute: enable
Topology as VSA attribute: enable
Ingress rate control as VSA attribute: enable
Egress rate control as VSA attribute: enable
Interim interval (minutes): 0
Collecting accounting information of Wireless Controller: disable
With external: disable
19.6.6 backhaul-radio
UsethiscommandtoconfigurethebackhaulradiobandforadynamicmeshWLANservice.The
backhaul‐radiocommandisaccessiblefromthewlans:<WLAN‐service‐name>contextoftheCLI
fordynamicmeshtypeWLANservices.
Syntax
backhaul-radio a|bg
Parameters
Usage
AfterthiscommandhasbeenexecutedforthedynamicmeshWLANservicebeingconfigured,it
willnolongerbeavailable.
a Selectthe5GHzradioband
bg Selectthe2.4GHzradioband