Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-33
Examples
Thefollowingexamplesetstheauthentication modetoexternalcaptiveportal:
EWC.enterasys.com:wlans:test:auth# mode external
EWC.enterasys.com:wlans:test:auth# apply
EWC.enterasys.com:wlans:test:auth# show mode
Authentication mode: external
19.6.5.19 move
Usethemovecommand,fromwithintheRADIUSserverconfigurationcommandmode,to
changethepositionofaRADIUSserverintheRADIUSserverlist.Themovecommandis
accessiblefromthewlans:<WLAN‐service‐name>:authcontextoftheCLI.
Syntax
move <current-position> <new-position>
Parameters
Usage
YoumustbeinRADIUSserverconfigurat ionmodeforthemovecommandtobeavailable.Use
theconfigcommandtoenterRADIUSserverconfigurationmode.Formoreinformation,see
“config”onpage 19‐28.
Examples
ThefollowingexamplemovestheRADIUSserverintheRADIUSserverlistposition2toposition
1intheRADIUSserverlist:
EWC.enterasys.com:wlans:cnl-AAA:auth# move 2 1
EWC.enterasys.com:wlans:cnl-AAA:auth# apply
19.6.5.20 nasid
UsethenasidcommandtoidentifytheNetworkAccessServer(NAS)tobeusedwiththeRADIUS
serverbeingconfigured.Thenasidcommandisaccessiblefromthewlans:<WLAN‐service‐
name>:authcontextoftheCLI.
Syntax
nasid <string> | vnsname
Note: After you run the mode command, you must run the apply command to implement the
changes.
<current‐position> SpecifiesthecurrentpositionoftheRADIUSserverintheRADIUS
serverlist.Validvaluesarefrom1‐32 .
<new‐position> SpecifiesthenewpositionoftheRADIUSserverintheRADIUSserver
list.Validvaluesarefrom1‐32.
Note: After you run the move command, you must run the apply command to implement the
changes.