Specifications

19-30 wlans Commands
Parameters
Usage
Theinterimcommandisnotavailablewhentheauthenticationmodeisguestportal.Whenthe
authenticationmodeisdisabled,MACmustbeenabledforthiscommandtobeavailable.For
authenticationmodecommandinformation,see“mode”onpage 19‐32.Formaccommand
information,see“mac”onpage 19‐30.
Examples
Thefollowingexamplesetstheinterimvalueto40minutes:
EWC.enterasys.com:wlans:test:auth# interim 40
19.6.5.14 mac
UsethemaccommandtoenableordisableMACbasedauthentication.Themaccommand is
accessiblefromthewlan:<WLAN‐service‐name>:authcontextoftheCLI.
Syntax
mac enable | disable
Parameters
Usage
Themaccommandisnotavailableintheguestsplashandguestportalauthenticationmodes.For
moreinformation,see“mode”onpage 19‐32.
Examples
ThefollowingexampleenablesMACauthentication forthetestWLANS:
EWC.enterasys.com:wlans:test:auth# mac enable
EWC.enterasys.com:wlans:test:auth# show mac
MAC based authorization: enable
19.6.5.15 mac-auto-authenticate
Usethemac‐auto‐authenticatecommandtoautomaticallyauthenticateauthorizedusers.The
mac‐auto‐authenticatecommandisaccessiblefromthewlans:<W LAN‐service‐name>:auth
contextoftheCLI.
Syntax
mac-auto-authenticate enable | disable
<interim‐interval‐value> Specifyanintegervalueinminutesforthe interiminterval.
Thedefaultvalueis30minutes.
enable|disable SpecifiestoenableordisableMACbased authentication