Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-29
configuringRADIUSserverattributes,usethe exitcommandtoreturntothewlans:<WLAN‐
service‐name>context.
Examples
ThefollowingexampleconfigurestheRADIUSserver“radius1”asanauthenticationserver:
EWC.enterasys.com:wlans:cnl-AAA:auth# config radius1 role auth prot PAP
EWC.enterasys.com:wlans:cnl-AAA:auth# show
Current selected Radius server radius1 role auth
Priority Name Role NAS IP NAS ID Auth Type
1 radius1 auth Use VNS IP address Use VNS name PAP
NAS identifier: Use VNS name
NAS IP address: Use VNS IP address
Authentication type: PAP
19.6.5.12 config exit
UsetheconfigexitcommandtoexittheRADIUSserverconfigurationmode.Theconfigexit
commandisaccessiblefromthewlans:<WLAN‐service‐name>:authcontextoftheCLI.
Syntax
config exit
Parameters
None
Usage
UsingtheconfigexitcommandfromwithintheRADIUSserverconfigurationcommandmode
exitsthewlans:<WLAN‐service‐name>:authRADIUSserverconfigurationcontextandplacesyou
inthewlans:<WLAN‐service‐name>:authcontext.
Examples
ThefollowingexampleexitstheRADIUSserverconfigurationcommandmode:
EWC.enterasys.com:wlans:cnl-AAA:auth# config exit
EWC.enterasys.com:wlans:cnl-AAA:auth#
19.6.5.13 interim
UsetheinterimcommandtoconfiguretheRADIUSaccountingserverinterimaccounting
interval.Theinterimcommandisaccessiblefromthewlans:<WLAN‐service‐name>:authcontext
oftheCLI.
Syntax
interim <interim-interval-value>