Specifications

19-22 wlans Commands
Examples
Thefollowingexamplespecifies anExternalRedirectionURL:
EWC.enterasys.com:wlans:CNL-7-CP:auth:captiveportal# extredir http://
192.168.4.89:80
EWC.enterasys.com:wlans:CNL-7-CP:auth:captiveportal# apply
19.6.5.9.7 extsecret
Usetheextsecretcommand,withincontextwlan:<WLAN‐service‐name >:auth:captiveportal ,to
definetheSharedSecretpasswordcommontoboththeEnterasysWirelessControllerandthe
externalwebserver.
Syntax
extsecret <value_string> | none
Parameters
Usage
Theexternalauthenticationmodemustbesetforthiscommandtobeavailable.Formore
information,see“mode”onpage 19‐32.
Examples
ThefollowingexamplecreatesaSharedSecretpassword:
EWC.enterasys.com:wlans:CNL-7-CP:auth:captiveportal# extsecret 5eCretH4nD5h4k3
EWC.enterasys.com:wlans:CNL-7-CP:auth:captiveportal# apply
19.6.5.9.8 fqdn
Usethefqdncommand,withincontextwlan:<WLAN‐service‐name>:auth:captive portal,to
replacetheGatewayIPaddresswithaFullyQualifiedDomainName(FQDN).
Syntax
fqdn <value_string> | none
Parameters
Note: After you run the extredir command, you must run the apply command to implement the
changes.
<value_string> Specifiesapassword
none Specifiesthatnopasswordisconfigured
Note: After you run the extsecret command, you must run the apply command to implement the
changes.
<value_string> Specifiesadomainname
none SpecifiesthattheGatewayIPaddressisnotreplacedwithaFQDN