Specifications

19-16 wlans Commands
Examples
ThefollowingexampleenablestheinclusionofpolicyinformationinthemessagetotheRADIUS
server:
EWC.enterasys.com:wlans:test:auth# auth-policy enable
EWC.enterasys.com:wlans:test:auth# apply
EWC.enterasys.com:wlans:test:auth# show auth-policy
Policy as VSA attribute: enable
19.6.5.6 auth-ssid
Usetheauth‐ssidcommandtoincludeSSIDinformationinthemessagetotheRADIUSserver.
Theauth‐ssidcommandisaccessiblefromthewlan:<WLAN‐service‐name>:authcontextofthe
CLI.
Syntax
auth-ssid enable | disable
Parameters
Usage
Theauth‐ssidcommandisnotavailablewhentheauthenticationmodeisguestportal.Whenthe
authenticationmodeisdisabled,MACmustbeenabledforthiscommandtobeavailable.For
moreinformation,see“mode”onpage 19‐32.
Examples
ThefollowingexampleenablestheinclusionofSSIDinformationinmessagestotheRADIUS
server:
EWC.enterasys.com:wlans:test:auth# auth-ssid enable
EWC.enterasys.com:wlans:test:auth# apply
EWC.enterasys.com:wlans:test:auth# show auth-ssid
SSID as VSA attribute: enable
Note: After you run this command, you must run the apply command to implement the changes.
enable|disable SpecifiestoenableordisabletheinclusionofSSID
informationinmessagestotheRADIUSserver
Note: After you run this command, you must run the apply command to implement the changes.