Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-15
19.6.5.4 auth-ingress
Usetheauth‐ingresscommandtoincludeingressratecontrolinformationinthemessagetothe
RADIUSserver.Theauth‐ingresscommandisaccessiblefromthewlan:<WLAN‐service‐
name>:authcontextoftheCLI.
Syntax
auth-ingress enable | disable
Parameters
Usage
Theauth‐ingresscommandisnotavailablewhentheauthenticationmodeisguestportal.When
theauthenticationmodeisdisabled,MACmustbeenabledforthiscommandtobeavailable.For
moreinformation,see“mode”onpage 19‐32.
Examples
Thefollowingexamp leenablestheinclusionofingressratecontrolinformationinmessagestothe
RADIUSserver:
EWC.enterasys.com:wlans:test:auth# auth-ingress enable
EWC.enterasys.com:wlans:test:auth# apply
EWC.enterasys.com:wlans:test:auth# show auth-ingress
Ingress as VSA attribute: enable
19.6.5.5 auth-policy
Usetheauth‐policycommandtoincludepolicyinformationinthemessagetotheRADIUSserver.
Theauth‐policycommandisaccessiblefromthewlan:<WLAN‐service‐name>:authcontextofthe
CLI.
Syntax
auth-policy enable | disable
Parameters
Usage
Theauth‐policycommandisnotavailablewhentheauthenticationmodeisguestportal.Whenthe
authenticationmodeisdisabled,MACmustbeenabledforthiscommandtobeavailable.For
moreinformation,see“mode”onpage 19‐32.
enable|disable Specifiestoenableordisabletheinclusionofingressrate
control
informationinmessagestotheRADIUSserver
Note: After you run this command, you must run the apply command to implement the changes.
enable|disable Specifiestoenableordisabletheinclusionofpolicy
informationinmessagestotheRADIUSserver