Specifications
Enterasys Wireless Controller Software CLI Reference Guide 19-11
Usage
ThiscommandisonlyavailablewhentheWLANservicetypeisWDS.
Examples
Thefollowingexamplereflectsthefollowing:
•APLancasterisservingasachildofAPArubaonradioradio1
•APAuberonisthe backupparentofAPLancaster
•Workgroupbridgingisswitchedoff
EWC.enterasys.com:wlans:shopfloor_WDS_wlan# aplist-wds Lancaster radio1 child
radio2 parent pref-parent Aruba backup-parent Auberon wkgbridge off
EWC.enterasys.com:wlans:shopfloor_WDS_wlan# apply
19.6.4 aplist-wds (Mesh)
Usetheaplist‐wdscommandtoaddanAPtoadynamicmeshtypeWLANserviceconfiguration.
Theaplist‐wdscommandisaccessiblefromthewlans:<WLAN‐service‐name>contextoftheCLI
whentheWLANservicetypeismesh.
Referto“19.6.3 aplist‐wds(WDS)”onpage 19‐10forinformationabou t
usingthecommandto
configureaWDStypeofWLANservice.
Syntax
aplist-wds <ap-name> (none|portal|mesh) [wkgbridge (on|off)] [radio1|radio2]
Parameters
Usage
AnAPcanbeassignedtoeitherastaticmesh/WDSWLANserviceoradynamicmeshWLAN
service,butnottobothtypesofmeshserviceatthesametime.
Ondual‐bandAPs,ifonlyoneradiomatchesthebackhaulradioband,selectingaradiois
optional.Ifaradio
isselectedbutitisthewrongone,thesystemwillprintanerrormessage.
Ifmorethanoneradiomatchesthebackhaulradioband,thenselectingaradioismandatoryand
anerrormessagewillprintifnoradioisselected.
Note: After you run the aplist-wds command, you must run the apply command to implement the
changes.
ap‐name NameoftheAPbeingassignedtotheWLANservice.
none|portal|mesh none=default,notassignedtotheWLANservice.
portal=theAPisameshportal(equivalenttoparentinstaticmesh
WLANs).
mesh=theAPisameshAP.
wkgbridge(on|off) Configurestheworkgroupbridging
radio1|radio2 Foradual‐
bandradioAP,ifmorethanoneavailableradiomatchesthe
backhaulradiosettings,selectoneoftheradiosforbackhaul.