Specifications

Enterasys Wireless Controller Software CLI Reference Guide 19-9
19.6.1 3pap
Usethe3papcommandtoaddathirdpartyAPtotheWLANserviceconfiguration.Usethe[no]
formofthecommandtoremoveathirdpartyAPfromtheWLANserviceconfiguration.The3pap
commandisaccessiblefromthewlan:<WLAN‐service‐name>contextoftheCLIwhentheWLAN
service
typeis3PAP.
Syntax
[no] 3pap <A.B.C.D> <HH:HH:HH:HH:HH:HH>
Parameters
Usage
ThiscommandisonlyavailablewhentheWLANservicetypeisthirdpartyAP(3pap).
Examples
ThefollowingexampleaddsathirdpartyAPbyIPandMACaddresstotheWLANservice
named“3pap‐test”:
EWC.enterasys.com:wlans:3pap-test# 3pap 1.2.3.4 11:22:33:44:55:66
EWC.enterasys.com:wlans:test# apply
19.6.2 aplist
UsetheaplistcommandtoaddorremoveanAPtoorfromtheWLANserviceconfiguration.The
aplistcommandisaccessiblefromthewlan:<WLAN‐service‐name>contextoftheCLIwhenthe
WLANservicetypeisstandard.
Syntax
[no] aplist <ap-name> radio1|radio2|both
Parameters
Usage
ThiscommandisonlyavailablewhentheWLANservicetypeisSTD.
<A.B.C.D> SpecifiestheIPv4addressofthethirdpartyAPtoaddtoor
removefromtheWLANservice
<HH:HH:HH:HH:HH:HH> SpecifiestheMACaddressofthethirdpartyAPtoaddtoor
removefromtheWLANservice
Note: After you run the 3pap command, you must run the apply command to implement the
changes.
<ap‐name> SpecifiesthenameoftheAPtoaddorremovefromthe
WLANservice.Thenoformofthecommandremovesthe
AP
radio1|radio2|both Specifiestouseradio1,radio2,orbothwiththeWLA N
service