Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-39
18.8.8 wlans-name
Usethewlans‐namecommandinthevnsmode:<named‐VNS>contexttoassociateadifferent
WLANServicewiththecurrentVNS.OnlyoneWLANServicecanbeassociatedwithaVNSata
time.
Syntax
wlans-name <WLAN-Service-name>
Parameters
Examples
ThisexamplechangestheassociatedWLANServicetowlan4fortheVNSnamedVNS1.
EWC.enterasys.com:vnsmode:VNS1# wlans-name wlan4
EWC.enterasys.com:vnsmode:VNS1# apply
18.8.9 show
Usetheshowcommandinthevnsmode:<named‐VNS>contexttodisplayinformationaboutthe
currentVNS.
Syntax
show
Parameters
None.
Examples
ThisexampledisplaysinformationaboutthecurrentVNSnamedVNS1.
EWC.enterasys.com:vnsmode:VNS1# show
WLANS service: wlan4
Non-authenticated: p4
Authenticated: same as non-authenticated
Restrict available policy set: disable
Enable status: enable
Synchronize: enable
Name: VNS1
Note: After you run the sync command, you must run the apply command to implement the
changes.
<WLAN‐Service‐name> Specifiesthenameofthe.WLANServicetoassociatewith
thisVNS.
Note: After you run the wlans-name command, you must run the apply command to implement the
changes.