Specifications

18-38 VNS Commands (vnsmode)
EWC.enterasys.com:vnsmode:VNS1# restrict enable
EWC.enterasys.com:vnsmode:VNS1# apply
18.8.6 status
Usethestatuscommandinthevnsmode:<named ‐VNS>contexttoenableordisablethecurrent
VNS.
Syntax
status (enable | disable)
Parameters
Examples
ThisexampledisablesthecurrentVNSnamedVNS1.
EWC.enterasys.com:vnsmode:VNS1# status disable
EWC.enterasys.com:vnsmode:VNS1# apply
18.8.7 sync
Usethesynccommandinthevnsmode:<named‐VNS>contexttoenableordisableautomatic
synchronizationofthisVNSacrosspairedcontrollers.RefertotheEnterasysWirelessController
UserGuideformoreinformationaboutsynchronizationofVNSs.
Syntax
sync (enable | disable)
Parameters
Examples
ThisexampleenablesautomaticsynchronizationofthecurrentVNS,namedVNS1,acrosspaired 
controllers.
EWC.enterasys.com:vnsmode:VNS1# sync enable
EWC.enterasys.com:vnsmode:VNS1# apply
Note: After you run the restrict command, you must run the apply command to implement the
changes.
enable Enables theVNS.
disable DisablestheVNS.
Note: After you run the status command, you must run the apply command to implement the
changes.
enable Enables automaticsynchronizationofthisVNSacross
pairedcontrollers.
disable Disablesau tomaticsynchronizationofthisVNS.