Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-37
18.8.4 pre-auth
Usethepre‐authcommandtoassignthedefaultpolicyforpre‐authenticatedclientswhenthe
WLANServiceassignedtothisVNSisconfiguredwiththe3pap(3rdparty AP)mode.The
referencedpolicycanonlyreferenceaTopologyofmodephysical.Thiscommandisavailablein
thevnsmode:<named‐VNS>
context.
Syntax
pre-auth <policy-name> | non-auth
Parameters
Examples
Thefollowingexamplesetsthepolicyforpre‐authenticatedclientstothedefaultpolicyfornon‐
authenticatedclients.
EWC.enterasys.com:vnsmode:Wireless# pre-auth non-auth
EWC.enterasys.com:vnsmode:Wireless# show
WLANS service: 3rd
Non-authenticated: WirelessNonAuthPolicy
Authenticated: WirelessAuthPolicy
Pre-authenticated: same as non-authenticated
Restrict available policy set: disable
Enable status: disable
Synchronize: disable
Name: Wireless
18.8.5 restrict
Usetherestrictcommandinthevnsmode:<named‐VNS>contexttoenableordisablethe“Restrict
PolicySet”featureforthisVNS.Youcanenablethe“RestrictPolicySet”featureforVNSsthat
wereconfiguredpriortoV7.0andupgradedtoV7.0ifyouwantthecontrollertorespectthepre‐
V7.0
policyrepresentationandtomapexternalreferencestoproperlynamedpolicy
representationscreatedduringupgrade.
Syntax
restrict (enable | disable)
Parameters
Examples
ThisexampleenablestheRestrictPolicySetfeaturefortheVNSnamedVNS1.
<policy‐name> Specifiesthenameofthepolicytobeappliedtopre‐
authenticatedclients.
non‐auth Usethedefaultpolicyfornon‐authenticatedclientsforpre‐
authenticatedclients.
enable Enables the“RestrictPolicySet”feature.
disable Disablesthe“RestrictPolicySet”feature.