Specifications

18-34 VNS Commands (vnsmode)
Deleterateprofile
Thefollowingexampledeletesthelowspeedprofile.
EWC.enterasys.com:vnsmode:rateprofile# delete lowspeed
18.7.3 show
Usetheshowcommandtodisplayallexistingbandwidthratecontrolprofilesoraspecificprofile.
Syntax
show [<profile_name>]
Parameters
Examples
Thefollowingexampledisplaysallexistingratecontrolprofiles.
EWC.enterasys.com:vnsmode:rateprofile# show
Unlimited,0
lowspeed,200
18.8 <named-VNS>
Executingthe<named‐VNS>command,where<named‐VNS>referstothenameofaconfigured
VNS,movesyouintothevnsmode:<named‐VNS>context,whichcontainscommandsto
configurethesettingsofthespecifiedindividualVNS.
Thefollowingcommandsareavailableinthevnsmode:<named‐VNS>context:
• auth
• non‐auth
• name
• pre‐auth
• restrict
• status
• sync
• wlans‐name
• show
Note: If the rate control profile that you are attempting to delete is being used by any other VNS, the
system returns the following message: You can not delete this profile because it is used by
other VNS.
<profile_name> Specifiesthe nameofaspecificratecontrolprofiletodisplay.