Specifications

3-4 root Commands
3.2.2 pairip
UsethepairipcommandtospecifythebackupoftheEnterasysWirelessController’sIPaddress.
Syntax
pairip <IP Address>
Parameters
Examples
ThefollowingexamplesetsanIPaddressforthebackupEnterasysWirelessController
EWC.enterasys.com:availability# pairip 123.321.24.54
3.2.3 pairrole
UsethepairrolecommandtodesignatetheEnterasysWirelessControllerastheprimary
connectionpointforavailabilityLinkExchangeorasthesecondarypoint.
Syntax
pairrole (primary|secondary)
Parameters
Examples
ThefollowingexamplesetsthecurrentEnterasysWirelessControllertobetheprimary
connectionpoint
EWC.enterasys.com:availability# pairrole primary
3.2.4 fast_failover
Usethefast_failovercommandtoenablefastfailoveroftheWirelessAPstothesecondary
controllerin‘availability’mode.Usethenoformofthecommandtodisablethefastfailover
feature.
Syntax
fast_failover
no fast_failover
<IPAddress> SpecifiestheIPaddressofthebackupcontroller
Note: When an Enterasys Wireless Controller is set as the secondary connection point, Wireless
AP registration requests will be set to pending until the other Enterasys Wireless Controller is set up
as the primary connection point.
primary Assignstheprimaryconnectionpointrole
secondary Assignsthesecondaryconnectionpointrole