Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-29
18.6.9.4 acct-timeout
Usetheacct‐timeoutcommandtosetthetimeoutforRADIUSaccounting.Theacct‐timeout
commandisaccessiblefromthevnsmode:radius:<named_RADIUS_server>contextoftheCLI.
Syntax
acct-timeout <1-360>
Parameters
Examples
ThefollowingexamplesetstheRADIUSaccountingtimeoutto10secondsfortheRADIUSserver
namedRAD1.
EWC.enterasys.com:vnsmode:radius:RAD1# acct-timeout 10
18.6.9.5 auth-port
Usetheauth‐portcommandtosetthepriorityforRADIUSauthentication.Theauth‐port
commandisaccessiblefromthevnsmode:radius:<named_RADIUS_server>contextoftheCLI.If
youdonotchangetheauthenticationportnumberwiththiscommand,thecontrollerusesthe
defaultport1812.
Syntax
auth-port <0-65535>
Parameters
Examples
ThefollowingexamplesetstheportforRADIUSauthenticationtoport1816fortheRADIUS
servernamedRAD1.
EWC.enterasys.com:vnsmode:radius:RAD1# auth-port 1816
18.6.9.6 auth-prio
Usetheauth‐priocommandtosetthepriorityforRADIUSauthentication.Theauth‐prio
commandisaccessiblefromthevnsmode:radius:<named_RADIUS_server>contextoftheCLI.
Syntax
auth-prio <0-32>
Parameters
<1‐360> SpecifiestheRADIUS accountingtimeoutinseconds.
<0‐65535> SpecifiestheRADIUSauthenticationport.
<0‐32> SpecifiestheRADIUSauthenticationpriority.