Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-27
18.6.8 strict
UsethiscommandtoenableordisabletheabilitytochangeRADIUSserversettingsperWLAN
Service.Thiscommandisavailablefromthevnsmode:radiuscontext.
Syntax
strict <enable | disable>
Parameters
Examples
ThisexampledisableschangingRADIUSserversettingsperWLANService.
EWC.enterasys.com:vnsmode:radius# strict disable
18.6.9 <named_RADIUS_server>
The<named_RADIUS_server>command,where<named_RADIUS_ server>referstothenameof
agivenRADIUSserver,isavailableinthevnsmode:radiuscontext.Whenexecuted,itmovesyou
intothevnsmode:radius:<named_RADIUS_server>context,whichcontainscommandsto
configurethesettingsofthespecifiedindividualRADIUSserver.
Thefollowingcommandsareavailableinthevnsmode:radius:<named_
RADIUS_server>
context:
• acct‐port
• acct‐prio
• acct‐retries
• acct‐timeout
• auth‐port
• auth‐prio
• auth‐retries
• auth‐timeout
• interim
• ip
• name
• protocol
• shared‐secret
18.6.9.1 acct-port
Usetheacct‐portcommandtosettheportforRADIUSaccounting.Theacct‐po rtcommandis
accessiblefromthevnsmode:radius:<named_RADIUS_server>contextoftheCLI.
Ifyoudonotchangetheportwiththiscommand,thedefaultport1813isused.
enable EnableschangingRADIUSserversetting sperWLANService.
disable Disableschanging
RADIUSserversettingsperWLANService.