Specifications

18-26 VNS Commands (vnsmode)
Examples
ThefollowingexamplesetstheRADIUSMACaddressformattoXX:XX:XX:XX:XX:XX
EWC.enterasys.com:vnsmode:radius# radius-mac-format 2
18.6.7 rename
UsetherenamecommandtorenametheRADIUSserver.Therenamecommandisaccessiblefrom
thevnsmode:radiuscontextoftheCLI.
Syntax
rename <radius-name> new-name <new-name>
Parameters
Examples
ThefollowingexamplerenamestheRADIUSserverADVtoIAV.
EWC.enterasys.com:vnsmode:radius# rename ADV new-name IAV
5SpecifiesaMACaddressformatofXXXXXX‐XXXXXXforusewiththe
RADIUSserver
6SpecifiesaMACaddressformatofXXXXXXXXXXXXforusewith
theRADIUSserver
101 SpecifiesaMACaddressformatofxxxxxxxxxxxxforusewiththe
RADIUSserver
102 SpecifiesaMACaddressformatofxx:xx:xx:xx:xx:xx
forusewiththe
RADIUSserver
103 SpecifiesaMACaddressformatofxx‐xx‐xx‐xx‐xx‐xxforusewiththe
RADIUSserver
104 SpecifiesaMACaddressformatofxxxx.xxxx.xxxxforusewiththe
RADIUSserver
105 SpecifiesaMACaddressformatofxxxxxx‐xxxxxxforusewiththe
RADIUS
server
106 SpecifiesaMACaddressformatofxxxxxxxxxxxxforusewiththe
RADIUSserver
Note: After you run the radius-mac-format command, you must run the apply command to
implement the changes.
<radius‐name> SpecifiestheexistingnameoftheRADIUSserver
new‐name Identifiesthatthefollowingcharactersaretobe thenewnameforthe
RADIUSserver
<new‐name> SpecifiesthenewnameoftheRADIUSserver