Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-23
EWC.enterasys.com:vnsmode:radius# create test-radius-server 10.10.10.10 test
EWC.enterasys.com:vnsmode:radius# test-radius-server
EWC.enterasys.com:vnsmode:radius:test-radius-server# show
Authentication port: 1812
Accounting port: 1813
Authentication priority: 5
Accounting priority: 5
Authentication total number of tries: 3
Accounting total number of tries: 3
Authentication RADIUS request timeout: 5
Accounting RADIUS request timeout: 5
Interim accounting interval: 0
Default protocol: PAP
Shared secret: ****
Name: test-radius-server
18.6.2 delay-client-msg
Usethedelay‐client‐msgcommandtosetthedelay,inseconds,fortheclientmessagethat
displaysifatopologychangeoccursduringathentication.Thedelay‐client‐msgcommandis
accessiblefromthevnsmode:radiuscontextoftheCLI.
Syntax
delay-client-msg <1-60>
Parameters
Examples
Thefollowingexamplesetsthedelayto40seconds.
EWC.enterasys.com:vnsmode:radius# delay-client-msg 40
18.6.3 delete
UsethedeletecommandtodeleteaRADIUSserverconfiguration.Thedeletecommandis
accessiblefromthevnsmode:radiuscontextoftheCLI.
Syntax
delete <RADIUS_server>
Parameters
<1‐60> Thetime,inseconds,thattheclientmessagedisplaysifatopology
changeoccursduringathentication.
<RADIUS_server> SpecifiesthenameoftheRADIUSservertodelete