Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-21
Parameters
Examples
Thefollowingexampledeletesfilterrule1anddisplaystheremainingdenyallrule:
EWC.enterasys.com:vnsmode:default-policy:apfilters# delete 1
EWC.enterasys.com:vnsmode:default-policy:apfilters# show
Custom AP Filters: enable
filter 1 (default) proto none 0.0.0.0 all_ports both deny
EWC.enterasys.com:vnsmode:default-policy:apfilters#
18.4.9.4 move
Usethemovecommandtomoveafilterrulefromitscurrentpositioninthefilterlisttothe
specifiedfilterlistposition.Themovecommandisaccessiblefromthevnsmode:default‐
policy:apfilterscontext.
Syntax
move <cur-pos> <new-pos>
Parameters
Examples
Thefollowingexample:
•Movestheruleinlistposition2tolistposition1
•Displaysthenewlistordering:
EWC.enterasys.com:vnsmode:default-policy:apfilters# move 2 1
EWC.enterasys.com:vnsmode:default-policy:apfilters# show
Custom AP Filters: enable
filter 1 proto udp interface-subnet port 20 2000 both allow
filter 2 proto icmp interface-subnet type 9 31 both allow
filter 3 (default) proto none 0.0.0.0 all_ports both deny
EWC.enterasys.com:vnsmode:default-policy:apfilters#
18.5 delete
UsethedeletecommandinvnsmodetodeleteanexistingVNS.
Syntax
delete <VNS name>
<pos> Specifiesthefilterrulelistpositionofthefiltertobedeleted.Valid
valuesarefrom0‐255.
<cur‐pos>
<new‐pos>
Specifiesthecurrentpositioninthefilterlistoftheruletobemoved,
followedby thenewlistpositionforthefilterrule.Validvaluesare
from0‐255.