Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-15
18.4.7 ulfilterap
UsetheulfilterapcommandtoenablefilteringontheAP.Theulfilterapcommandisaccessible
fromthevnsmode:default‐policycontext.
Syntax
ulfilterap {enable | disable}
Parameters
Usage
WhenfilteringisenabledontheAP,wirelessAPsobtainclientfilterinformationfromthe
EnterasysWirelessController.FilterrulesdefinedonthecontrollerareappliedbywirelessAPs.In
addition,directinter‐WirelessAPcommunicationallowsWirelessAPstoexchangeclientfilter
informationasclientsroamfromoneWirelessAP
toanother.
EnablingfilteringontheAPprovidesfortheabilitytoapplycustomfiltersfortheAPusingthe
apcustomcommand.
Examples
ThefollowingexampleenablesfilteringontheAPforthisvnsmode:default‐policycontext:
EWC.enterasys.com:vnsmode:default-policy# ulfilterap enable
EWC.enterasys.com:vnsmode:default-policy# show
Assigned topology: guestPortal
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: enable
Custom AP Filters: disable
Synchronize: enable
EWC.enterasys.com:vnsmode:default-policy#
18.4.8 apcustom
UsetheapcustomcommandtoenableconfiguringAPcustomfilters.Theapcustomcommandis
accessiblefromthevnsmode:default‐policycontext.
Syntax
apcustom {enable | disable}
Parameters
enable|disable ProvidesfortheenablingordisablingoffilteringontheAPforthis
vnsmode:default‐policycontext.
enable|disable ProvidesfortheenablingordisablingofAPcustomfiltersforthis
vnsmode:default‐policycontext.