Specifications

18-14 VNS Commands (vnsmode)
Usage
Referto“rateprofile”onpage 18‐32forRateProfileConfigurationInformation.
Examples
Thefollowingexampleconfiguresthedefault‐policywiththeUnlimitedegressrateprofile:
EWC.enterasys.com:vnsmode:default-policy# rateprf-out DocRateOut
EWC.enterasys.com:vnsmode:default-policy# apply
EWC.enterasys.com:vnsmode:default-policy# show
Assigned topology: guestPortal
Ingress rate profile: DocRateIn
Egress rate profile: DocRateOut
Enable AP filtering: disable
Synchronize: enable
EWC.enterasys.com:vnsmode:default-policy#
18.4.6 topology-name
Usethetopology‐namecommandtoassociateanalreadyexistingtopologywithapolicy.The
topology‐namecommandisaccessible fromthevnsmode:default‐policycontext.
Syntax
topology-name <topology>
Parameters
Usage
RefertoChapter 21,topologyCommandsforinformationonconfiguringtopologies.
Examples
Thefollowingexampleconfiguresthedefault‐policywiththeguestPortaltopology:
EWC.enterasys.com:vnsmode:default-policy# topology-name guestPortal
EWC.enterasys.com:vnsmode:default-policy# apply
EWC.enterasys.com:vnsmode:default-policy# show
Assigned topology: guestPortal
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: disable
Synchronize: enable
EWC.enterasys.com:vnsmode:default-policy#
<topology> Specifiesthenameofthetopologytoconfigureforthis
vnsmode:default‐policycontext.