Specifications

18-2 VNS Commands (vnsmode)
18.1.1 flex-client-access
Usetheflex‐client‐accesscommandtoconfigureflexibleclientaccess(FCA)tothewireless
medium.FCAcanbeadjustedinmultiplestepsbetweenpacketfairnessandairtimefairnessusing
thiscommand.Thiscommandisavailableinthevnsmode:adminctrcontext.
Syntax
flex-client-access 100%-packet | mostly-packet | mixed | mostly-airtime | 100%-
airtime
Parameters
Examples
ThefollowingexamplesetstheFCAto100%packetaccess.
EWC.enterasys.com:vnsmode:adminctr# flex-client-access 100%-packet
18.1.2 max-video-assoc
Usethemax‐video‐assoccommandtoconfigurethemaximumallowedoverallbandwidthonan
APwhenanalreadyassociatedclientrequestsadmissionforanewvideostream.
Syntax
max-video-assoc <0-100>
Parameters
Examples
Thefollowingexamplesetsthemaximumvideobandwidthfornewstreamsto40%oftotal
bandwidth.
EWC.enterasys.com:vnsmode:adminctr# max-video-assoc 40
100%‐packet Specifies100%packet accesstothewirelessmedium
mostly‐packet Specifiesmostlypacketaccesstothewirelessmedium
mixed Specifiesmixedaccesstothe wirelessmedium
mostly‐airtime Specifiesmostlyairtimeaccesstothewirelessmedium
100%‐airtime Specifies100%airtimeaccesstothewirelessmedium
<0‐100> Specifiesthemaximumallowablebandwidthasapercentageoftotal
bandwidth.
Note: After you run the max-video-assoc command, you must run the apply command to
implement the changes.